Cli configuration example – Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual
Page 74
74
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 3
Stratix 5100 Device Manager Configuration Startup
A final security warning appears.
Figure 29 - Certificate Security Warning
16. Click Yes.
Another page stating that the installation is successful appears.
Figure 30 - Import Successful page
17. Click OK.
The access point login dialog box appears and you must log into the access
point again.
CLI Configuration Example
This example shows the CLI commands that are equivalent to the steps listed in
Enabling HTTPS for Secure Browsing on page 69
.
In this example, the access point system name is ap1100, the domain name is
company.com, and the IP address of the DNS server is 10.91.107.18.
AP# configure terminal
AP(config)# hostname ap1100
AP(config)# ip domain name company.com
AP(config)# ip name-server 10.91.107.18
AP(config)# ip http secure-server
AP(config)# end
For complete descriptions of the commands used in this example, see
.