Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 462)

462 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 16 Configuring QoS
5. From the Apply Class of Service pull-down menu, select the class of service
that you want the access point to apply packets to the type that you
selected from the IP Precedence menu.
6. The access point matches your IP Precedence selection with your class of
service selection.
These are the settings in the Apply Class of Service menu:
• Best Effort (0)
• Background (1)
• Spare (2)
• Excellent (3)
• Control Lead (4)
• Video <100 ms Latency (5)
• Voice <100 ms Latency (6)
• Network Control (7)
7. Click Add beside the Class of Service menu for IP Precedence.
The classification appears in the Classifications field. To delete a
classification, select it and click Delete beside the Classifications field.
If the packets that you need to prioritize contain IP DSCP precedence
information in the IP header TOS field, select an IP DSCP classification
from the IP DSCP pull-down menu. These are the menu choices:
• Best Effort
• Assured Forwarding - Class 1 Low
• Assured Forwarding - Class 1 Medium
• Assured Forwarding - Class 1 High
• Assured Forwarding - Class 2 Low
• Assured Forwarding - Class 2 Medium
• Assured Forwarding - Class 2 High
• Assured Forwarding - Class 3 Low
• Assured Forwarding - Class 3 Medium
• Assured Forwarding - Class 3 High
• Assured Forwarding - Class 4 Low