Non-root bridge without vlans – Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual
Page 312
Advertising
![background image](/manuals/579394/312/background.png)
312
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 9
Configuring Spanning Tree Protocol
Non-root Bridge without VLANs
This example shows the configuration of a non-root bridge with no VLANs
configured with STP enabled:
hostname client-bridge-north
ip subnet-zero
!
bridge irb
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid tsunami
authentication open
guest-mode
!
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
rts threshold 2312
station-role non-root
no cdp enable
bridge-group 1
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1 path-cost 40
!
interface BVI1
ip address 1.4.64.24 255.255.0.0
no ip route-cache
!
bridge 1 protocol ieee
bridge 1 route ip
bridge 1 priority 10000
Advertising