Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 99)

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 99
Stratix 5100 Device Manager Parameter Definitions Chapter 4
Network Interface Radio Settings Page
The Setting page provides detailed parameters settings for the interface you need
to configure. There are some overlap in these parameters with the Easy Setup
page.
Figure 39 - Interface Settings Page
Table 20 - Radio0-802.11n 2 GHz and Radio1-802.11n 5 GHz Settings Description
Parameter Description
Operating Mode This value indicates whether or not the radio supports multiple protocols, as in 802.11b,
802.11g or 802.11n for instance.
A radio in mixed mode supports clients from multiple clients at the same time.
Enable Radio This is where you enable the radios. In the easy Setup page, you can set some parameters,
but you need to go to this page to enable the radio.
Network>Network Interface>Radio0-802.11n 2 GHz (or Radio0-802.11n 5 GHz) >Settings
to enable a radio.