Configure a group of servers – Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual
Page 387

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
387
Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
Chapter 13
The WDS Server Groups Page appears.
Figure 103 - WDS Server Groups Page
Configure a Group of Servers
Follow these instructions to create a group of servers to be used for 802.1x
authentication for the infrastructure devices (access points) that use the WDS
access point.
1. Enter a group name in the Server Group Name field.
2. From the Priority 1 pull-down menu, choose the primary server.
If a server that you need to add to the group does not appear in the Priority
pull-down menus, click Define Servers to browse to the Server Manager
page. Configure the server there, and then return to the WDS Server
Groups page.
3. (Optional) Choose backup servers from the Priority 2 and 3 pull-down
menus.
4. Click Apply.
TIP
If you don’t have an authentication server on your network, you can configure
an access point or an ISR as a local authentication server. See
Access Point as a Local Authenticator on page 319
for configuration
instructions.