Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 467)

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 467
Configuring QoS Chapter 16
The QoS Policies page appears.
Figure 112 - QoS Policies Page
4. With <NEW> selected in the Create/Edit Policy field, type a name for
the QoS policy in the Policy Name entry field. The name can contain up to
25 alphanumeric characters. Don’t include spaces in the policy name.
5. If the packets that you need to prioritize contain IP precedence
information in the IP header TOS field, select an IP precedence
classification from the IP Precedence pull-down menu. The classifications
include these choices:
• Routine (0)
• Priority (1)
• Immediate (2)
• Flash (3)
• Flash Override (4)
• Critic/CCP (5)
• Internet Control (6)
• Network Control (7)
6. From the Apply Class of Service pull-down menu, choose the class of
service that the access point applies to packets of the type that you selected
from the IP Precedence menu.
The access point matches your IP Precedence selection with your class of
service selection.
TIP You can also select two preconfigured QoS policies: WMM and Spectralink.
When you select either of these, a set of default classifications are
automatically populated in the Classification field.