Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual

Page 518

Advertising
background image

518

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014

Chapter 19

Configuring SNMP

This example shows how to allow read-only access for all objects to members of
access list 4 that use the comaccess community string. No other SNMP managers
have access to any objects. SNMP Authentication Failure traps are sent by
SNMPv2C to the host cisco.com by using the community string public.

AP(config)# snmp-server community comaccess ro 4

AP(config)# snmp-server enable traps snmp

authentication

AP(config)# snmp-server host cisco.com version 2c

public

This example shows how to send Entity MIB traps to the host cisco.com. The
community string is restricted. The first line enables the access point to send
Entity MIB traps in addition to any traps previously enabled. The second line
specifies the destination of these traps and overwrites any previous

snmp-

server host

commands for the host cisco.com.

AP(config)# snmp-server enable traps entity

AP(config)# snmp-server host cisco.com restricted

entity

This example shows how to enable the access point to send all traps to the host
myhost.cisco.com by using the community string public:

AP(config)# snmp-server enable traps

AP(config)# snmp-server host myhost.cisco.com

public

This example shows how to configure these SNMPv3 settings:

a view name (iso)

an SNMP engine ID (1234567890) that this agent uses to identify itself to

the remote host at IP address 1.4.74.10

an SNMPv3 group (admin) that supports privacy encryption, and all users

of the group have read and write access to all objects defined in the iso view

an SNMP user (joe) that belongs to the admin group, uses MD5

authentication for queries, uses xyz123 as a password for MD5, uses
DES56 data query encryption, and uses key007 as an encryption key

an SNMP user (fred) that belongs to the admin group, uses MD5

authentication for queries, uses abc789 as an encrypted password for
MD5, uses DES56 data query encryption, and uses key99 as an encryption
key

Advertising