Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 322)

322 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 10 Configure an Access Point as a Local Authenticator
Creating Local MAC Address Lists
Now that the SSID is configured, you can create the local MAC address list.
1. Click Security.
2. From the Security menu, click Advanced Security.
3. Click the MAC Address Authentication tab to move to the MAC Address
Authentication page.
4. Select Local List Only for the MAC Address Authenticated by parameter.
5. Click Apply on that MAC Address Authentication portion of the page.
6. In the Local MAC Address List section, enter the authorized MAC
address in the New MAC Address parameter.
7. Click Apply on that Local MAC Address List portion of the page.