Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 252)

252 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 7 Configuring Radio Settings
MCS rates are configured by using the speed command. The following example
shows a speed setting for an 802.11n 5 GHz radio:
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid 1250test
!
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0
36.0 48.0 54.0 m0. m1. m2. m3. m4. m8. m9. m10. m11.
m12. m13. m14. m15.
11 52 108 57 7/9 120
12 78 162 86 2/3 180
13 104 216 115 5/9 240
14 117 243 130 270
15 130 270 144 4/9 300
The legacy rates are:
5 GHz: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
2.4 GHz: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
Table 82 - Data Rates Based on MCS Settings, Guard Interval, and Channel Width (Continued)
MCS Index Guard Interval = 800 ns Guard Interval = 400 ns