Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 401)

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 401
Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services Chapter 13
2. Click WDS.
3. Check Use this AP as Wireless Domain Services and Configure Wireless
Network Manager.
4. In the Wireless Network Manager IP Address field, enter the IP address of
the WLSE device on your network.
5. Click Apply.
The WDS access point is configured to interact with your WLSE device.