Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 241)

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 241
Chapter
7
Configuring Radio Settings
This chapter describes how to configure radio settings for the wireless access
point.
Topic Page
Enabling the Radio Interface 242
Universal Workgroup Bridge Mode 245
Radio Tracking 246
Configuring Radio Data Rates 247
Configuring MCS Rates 251
Configuring Radio Transmit Power 253
Configuring Radio Channel Settings 255
Configuring Location-based Services 263
Disabling and Enabling Short Radio Preambles 265
Configuring Transmit and Receive Antennas 266
Enabling and Disabling Gratuitous Probe Response 267
Disabling and Enabling Aironet Extensions 268
Configuring the Ethernet Encapsulation Transformation Method 270
Enabling and Disabling Reliable Multicast to Workgroup Bridges 270
Enabling and Disabling Public Secure Packet Forwarding 272
Configuring the Beacon Period and the DTIM 273
Configure RTS Threshold and Retries 274
Configuring the Maximum Data Retries 275
Configuring the Fragmentation Threshold 275
Enabling Short Slot Time for 802.11g Radios 276
Performing a Carrier Busy Test 277
Configuring ClientLink 277
Debugging Radio Functions 278