Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 415)

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 415
Configuring RADIUS and TACACS+ Servers Chapter 14
Use the line password for authentication. You must define a line
password before you can use this authentication method. Use the
password password line configuration command.
• Local
Use the local username database for authentication. You must enter
username information in the database. Use the
username password
global configuration command.
• Radius
Use RADIUS authentication. You must configure the RADIUS server
before you can use this authentication method. For more information,
see
Identifying the RADIUS Server Host on page 410 .
aaa authentication login {default | list-name}
method1 [method2...]
4. Enter line configuration mode, and configure the lines that you want
applied to the authentication list.
line [console | tty | vty] line-number [ending-
line-number]
5. Apply the authentication list to a line or set of lines.
• If you specify default, use the default list created with the aaa
authentication login command.
• For list-name, specify the list created with the
aaa
authentication login command.
login authentication {default | list-name}
6. Configure the access point to send its system name in the NAS_ID
attribute for authentication.
radius-server attribute 32 include-in-access-req
format %h
7. Return to privileged EXEC mode.
end
8. Verify your entries.
show running-config
9. (Optional) Save your entries in the configuration file.
copy running-config startup-config
• To disable AAA, use the
no aaa new-model global configuration
command.
• To disable AAA authentication, use the
no aaa authentication
login {default | list-name} method1 [method2...]
global configuration command.
To either disable RADIUS authentication for login or to return to the default
value, use the
no login authentication {default | list-name}
line configuration command.