Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 400)

400 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 13 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
Beginning in privileged EXEC mode, follow these steps to configure the WDS:
1. Enter global configuration mode.
configure terminal
2. Configures the WDS as an MFP distributor.
When enabled, the WDS manages signature keys, used to create the MIC
IEs, and securely transfers them between generators and detectors.
dot11 ids mfp distributor
3. Return to the privileged EXEC mode.
end
4. (Optional) Save your entries in the configuration file.
copy running-config startup-config
Configuring Radio
Management When you configure access points on your wireless LAN to use WDS, the access
points automatically play a role in radio management when they interact with the
WDS device. To complete the radio management configuration, you configure
the WDS device to interact with the WLSE device on your network.
Follow these steps to enable radio management on an access point configured as a
WDS device:
1. Go to the Wireless Services Summary page.
Figure 107 - Wireless Services Summary Page