Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 32)

32 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 2 Install the Stratix 5100 Wireless Access Point/Workgroup Bridge
Ports and Connections The ports and connections are on the bottom of the access point.
Stratix 5100 WAP
Specifications This table lists the technical specifications for the Stratix 5100 Wireless Access
Point/Workgroup Bridge.
Ethernet Cable Recommendation
While the Stratix 5100 WAP works well with the CAT-5e cable for 10/100 MB
installations, we recommend that you use CAT-6a cable for 1 GB installations.
Item Description
1 Security hasp
2 Power connection
3 Gigabit Ethernet port
4 Console port
5 Mounting bracket pins
3 2472-M
1
3 4
5
2
Table 1 - Stratix 5100 Wireless Access Point/Workgroup Bridge Specifications
Category Specification
Dimensions (LxWxD) 22.04 x 22.04 x 4.67 cm (8.68 x 8.68 x 1.84 in.)
Weight 1.22 kg (2.7 lb)
Operating temperature -20…55 °C (-4…131 °F)
Storage temperature -30…85 °C (-22…185 °F)
Humidity 10…90% noncondensing
Power rating Input: 100…240 50/60 Hz VAC
Output: 48V DC, 350 mA
Antennas External
Compliance Complies with UL 2043 for products installed in a building’s environmental air
handling spaces, such as above suspended ceilings.
Maximum power and channel
settings Maximum power and the channels allowed in your regulatory domain. See
Channels and Maximum Power Settings for Cisco Aironet Lightweight Access
Points. This document is available on
Cisco.com .