Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 454)

454 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 15 Configuring VLANs
Configuring/Enabling VLAN
with SSID by Using Stratix
5100 Device Manager The default VLAN is the management VLAN, and all untagged frames are
implicitly associated with this default VLAN ID. Configure one of your VLANs
to be configured as the native.
Complete these steps to configure the VLAN.
1. From the Services menu, choose Services.
2. Click VLAN.
3. Enter a unique VLAN ID number between 1…4095.
4. Determine if you want this VLAN ID to be the native VLAN.
5. Click on the radio you are associating with this VLAN ID.