Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 64)

64 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 3 Stratix 5100 Device Manager Configuration Startup
Configuring Security After you assign the basic settings to the WAP, you must configure security
settings to prevent unauthorized access to your network. Because it is a radio
device, the access point can communicate beyond the physical boundaries of your
work site.
Just as you use the Easy Setup page to assign basic settings, you can use the Easy
Security page to create unique SSIDs and assign one of four security types to
them.
Figure 20 - Easy Setup Radio Security Settings