Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 34)

34 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 2 Install the Stratix 5100 Wireless Access Point/Workgroup Bridge
Figure 8 - Access Point Antenna Connections
The Stratix 5100 WAP is configured with up to four external dual-band dipole
antennas, and 2.4 GHz/5 GHz dual-band radios in a 3 x 4 MIMO configuration
with three spatial streams. The radios and antennas support frequency bands
2400…2500 MHz and 5150…5850 MHz through a common dual-band RF
interface. These are the features of the external dual-band dipole antennas:
• Four RP-TNC antenna connectors on the top of the access point
• Three TX and four RX antennas
1 Antenna connector A 4 Antenna connector D
2 Antenna connector B 5 Status Indicator
3 Antenna connector C
32471-M
1
2
3
4
5