Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 340)

340 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 10 Configure an Access Point as a Local Authenticator
PAC refresh : 0 Invalid PAC received : 0
Username Successes Failures Blocks
nicky 0 0 0
jones 0 0 0
jsmith 0 0 0
Router#sh radius local-server statistics
Successes : 1 Unknown usernames : 0
Client blocks : 0 Invalid passwords : 0
Unknown NAS : 0 Invalid packet from NAS: 0
The first section of statistics lists cumulative statistics from the local
authenticator.
The second section lists stats for each access point (NAS) authorized to use the
local authenticator. The EAP-FAST statistics in this section include these stats:
• Auto provision success—the number of PACs generated automatically
• Auto provision failure—the number of PACs not generated because of an
invalid handshake packet or invalid username or password
• PAC refresh—the number of PACs renewed by clients
• Invalid PAC received—the number of PACs received that were expired,
that the authenticator could not decrypt, or that were assigned to a client
username not in the authenticator’s database
The third section lists stats for individual users. If a user is blocked and the
lockout time is set to infinite,
blocked appears at the end of the stat line for that
user. If the lockout time is not infinite, Unblocked in x seconds appears at the end
of the stat line for that user.
Use this privileged exec mode command to reset local authenticator statistics to
zero:
AP# clear radius local-server statistics