Configuring advanced eap parameters – Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual
Page 330
![background image](/manuals/579394/330/background.png)
330
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 10
Configure an Access Point as a Local Authenticator
Configuring Advanced EAP Parameters
Now that the RADIUS server is added, you can configure advanced EAP
parameters. These steps are optional and can be skipped to expedite setup.
1. Click Security.
2. From the Security menu, click Advanced Security.
3. Click the Timers tab to go to the page where EAP authentication is
specified.
4. Choose one of the options that enable reauthentication.
These interval options set how often EAP authentication is reattempted.
You can enter your own interval or use the one provided by the RADIUS
server.
5. In the TKIP MIC Failure Holdoff Time text field, enter the amount of
time the access point needs to wait for wireless clients to respond to EAP
authentication requests.
6. Click Apply.