Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual
Page 190
190
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 5
Configure the Stratix 5100 WAP Using the Command-Line Interface
no ip address
ip mtu 1564
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface FastEthernet0.30
mtu 1500
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
no bridge-group 30 source-learning
bridge-group 30 spanning-disabled
!
interface BVI1
ip address 10.91.104.91 255.255.255.192
no ip route-cache
!
ip http server
ip http help-path http://www.cisco.com/warp/public/
779/smbiz/prodconfig/help/eag/ivory/1100
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req
format %h
radius-server host 10.91.104.92 auth-port 1645
acct-port 1646 key 7 091D1C5A4D5041
radius-server authorization permit missing Service-
Type
radius-server vsa send accounting
bridge 1 route ip
For the instructions in Device Manager, see