Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 404)

404 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 13 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
Displaying Monitor Mode Statistics
Use this global configuration command to display statistics on captured frames.
show wlccp ap rm monitor statistics
This example shows output from the command:
ap# show wlccp ap rm monitor statistics
Dot11Radio 0
====================
WLAN Monitoring : Enabled
Endpoint IP address : 10.91.107.19
Endpoint port : 2000
Frame Truncation Length : 535 bytes
Dot11Radio 1
====================
WLAN Monitoring : Disabled
WLAN Monitor Statistics
==========================
Total No. of frames rx by DOT11 driver : 58475
Total No. of Dot11 no buffers : 361
Total No. of Frames Q Failed : 0
Current No. of frames in SCAN Q : 0
Total No. of frames captured : 0
Total No. of data frames captured : 425
Total No. of control frames captured : 1957
Total No. of Mgmt frames captured : 20287
Total No. of CRC errored frames captured: 0
Total No. of captured frames forwarded : 23179
Total No. of captured frames forward failed : 0
To clear the monitor mode statistics, use this command.
clear wlccp ap rm statistics