Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 121)

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 121
Stratix 5100 Device Manager Parameter Definitions Chapter 4
Table 33 - Security: Server Manager Parameter Descriptions
Parameter Description
Backup RADIUS Server Enter the host name or IP address of the access point
acting as a local RADIUS server. Other access points on
your wireless LAN use this backup authenticator when the
main RADIUS server does not respond.
Shared Secret Enter the shared secret used by your Local/Backup RADIUS
server. The shared secret on the device must match the
shared secret on the Local/Backup server.
Corporate Servers Current Server List Identifies the servers that are currently available.
Server Enter the name or IP address of the server.
Shared Secret Enter the shared secret used by your RADIUS/TACACS+
server. The shared secret on the device must match the
shared secret on the RADIUS/TACACS+ server.
Authentication Port (optional) Enter the port number your RADIUS/TACACS+ server uses
for authentication. The port setting for the Cisco RADIUS
server (the Access Control Server [ACS]) is 1645, and the
port setting for many RADIUS servers is 1812. Check your
server's product documentation to find the correct port
setting.
Accounting Port (optional) Enter the port number your RADIUS server uses for
accounting. The port setting for Cisco's RADIUS server (the
Access Control Server [ACS]) is 1646, and the port setting
for many RADIUS servers is 1813. Check your server's
product documentation to find the correct accounting
port setting.
Default Server Priorities EAP Authentication Select the servers to be used for EAP authentication in
order of desired priority.
MAC Authentication Select the servers to be used for MAC authentication in
order of desired priority.
Accounting Select the servers to be used for Accounting in order of
desired priority.
Admin Authentication (RADIUS) Select the servers to be used for RADIUS admin
authentication in order of desired priority.
Admin Authentication (TACACS+) Select the servers to be used for TACACS Admin
authentication in order of desired priority.