Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual
Page 607
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
607
Index
RADIUS
attributes
CSID format, selecting
sent by the access point
vendor-proprietary
vendor-specific
WISPr
configuring
access point as local server
accounting
authentication
,
authorization
,
communication, global
,
communication, per-server
,
multiple UDP ports
default configuration
defining AAA server groups
,
displaying the configuration
,
identifying the server
limiting the services to the user
,
local authentication
method list, defined
operation of
overview
SSID
suggested network environments
tracking services accessed by user
range
rate limit, logging
recall commands
redirection, IP
regulatory domains
reliability problems with
reloading access point image
Remote Authentication Dial-In User Service
repeater
as a LEAP client
as a WPA client
chain of access points
request to send (RTS)
restricting access
overview
passwords and privilege levels
RADIUS
TACACS+
RFC
1042
1157, SNMPv1
1901, SNMPv2C
1902 to 1907, SNMPv2
roaming
fast secure roaming using CCKM
Rockwell Automation Support
root
root bridge
rotation, broadcast key
rts retries command
RTS threshold
rts threshold command
S
sample configuration
scanner
secure remote connections
Secure Shell
security
troubleshooting
security configuration
EAP authentication
no security
WEP key
WPA
security features
synchronizing
security hasp
security settings, Easy Setup page
self-healing wireless LAN
sequence numbers in log messages
server
protcol
server protocol
service set identifiers (SSIDs)
set BOOT command
set command
set-request operation
setting
severity levels, defining in system messages
shared key
short slot time
short-slot-time command
show cdp traffic command
show command
show dot11 associations command
Simple Network Management Protocol
Simple Network Time Protocol
site survey
site surveys