Liquid connections – Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control User Manual
Page 113
![background image](/manuals/580267/113/background.png)
Drive Installation 2-77
7000 “C” Frame
7000L-UM300I-EN-P – June 2013
Liquid Connections
Liquid-to-Air Heat Exchangers
There are three options for routing piping between the liquid-to-air
heat exchanger and the pumping cabinet of the drive:
• Pipes through top plate of cabinet
• Pipes through bottom plate of cabinet
• Pipes through right side of cabinet
Removable plates are provided in each of these locations.
Piping to Heat Exchanger
through top of cabinet
Outlet Coolant Connection
Warm Fluid to Heat Exchanger
Inlet Coolant Connection
Fluid return from Heat Exchanger
Piping to Heat Exchanger
Routing through bottom of cabinet
Piping to Heat Exchanger
Routing through right side of cabinet
Figure 2.16 – Connection to Liquid-to-Air Heat Exchanger
(rear of pumping cabinet shown with back plates removed)