Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 453)

Component Definition and Maintenance 6-109
7000 “C” Frame 7000L-UM300I-EN-P – June 2013
- You will be prompted to save the connection that
you just created. Click Yes. This will close the
HyperTerminal program.
The first step is complete. Now, you are ready to download the
firmware into the drive. For this you need to follow the steps as
outlined below.
Step-2: Downloading the Firmware
- Connect the null-modem cable between your
laptop‟s serial port and the serial port „J8‟ on the
CIB.
- Place the drive in download mode, if it was not
already in download mode. Refer to “Download
Mode” described above.
-
Restart HyperTerminal program. When you see the
„Connection Description‟ window, click Cancel.
- From the File menu, click Open… The Open
window will appear. Locate the HyperTerminal
Connection that you created earlier, and then click
Open.