Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 167)

Operator Interface 3-45
7000 “C” Frame 7000L-UM300I-EN-P – June 2013
Figure 3.55 – AC O/V Now Enabled
The changes to the fault masks do not take affect until the screen is
exited via the [F10] key, i.e. exiting the FAULTS OVERVIEW will
change the masks in the drive as will exiting the FAULTS SETUP
screen. In our example, exiting the FAULTS OVERVIEW screen
and returning to the FAULTS SETUP screen now shows the “AC
O/V” mask as being ON (Figure 3.56).
Figure 3.56 – AC O/V Mask is ON
User Definable External FaultsText
The drive contains a number of external fault inputs. You can
custom define the text associated with these inputs, which will be
used on the alarm screen and the fault mask screens.
To define the
text, use the up/down arrow keys on the SETUP screen to select the
'External Text' option and press the [enter] key.
A screen typical of
Figure 3.57 will be seen.
Figure 3.57 – External Setup Text