Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 204)

3-82 Operator Interface
7000L-UM300I-EN-P – June 2013 7000 “C” Frame
PanelView 550 PCMCIA Memory Card Description
Installation Data
The memory card slides into the card slot located on the backside of
the PowerFlex 7000L operator interface. These instructions show
how to insert the card in the Operator interface.
A T T E N T I O N A T T E N T I O N The memory card should be kept free from
moisture, extreme temperatures, and direct
sunlight. Failure to observe this caution could
result in damage to the card.
A T T E N T I O N A T T E N T I O N Do not subject memory card to flexing or extreme
shock. Failure to observe this caution could result
in damage to the card.
Installing the Memory Card
1. Locate the vertical card slot on the back of the operator
interface. See Figure 3.106.
COMMUNICATION CABLE
CARD SLOT
Figure 3.106 – Rear view of Operator Interface