Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 162)

3-40 Operator Interface
7000L-UM300I-EN-P – June 2013 7000 “C” Frame
the list can be expanded (Figure 3.46) . Use the up/down cursor keys
to scroll onto these additional options. Press the [enter] key to accept
the new value as shown
in Figure 3.47 .
Figure 3.46 – Option List Viewed on Multiple Pages
Figure 3.47 – Modification Completed
The new value is not sent to the drive until you exit the screen with
the [F10] key. Prior to this you can modify the new value by
repeating the above procedure, or you can cancel the change by
pressing the [F7] key. The CANCEL operation returns the new
value to that of the actual value.
Bit Encoded Value
When the parameter is a bit encoded value, the MODIFY
PARAMETER screen typical of
Figure 3.48 will be displayed. This
screen shows:
• the name of the parameter for which you are make the changes
(
i.e. Logic Mask)
• the tag code for the parameter ( i.e. 241)
•
the name of the bit currently selected (Adapter 0)
• the actual value of the parameter bits contained in the drive.