Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 147)

Operator Interface 3-25
7000 “C” Frame 7000L-UM300I-EN-P – June 2013
Use the data entry keys [0]-[9] to enter the desired code on the
SELECT CODE screen (Figure 3.27). The entered code may be
edited using the [backspace] key. Press the [enter] key.
Figure 3.27 – Select via Code (Step 1)
The screen will display one of two formats. If the code you entered
was valid, it will show the name of the tag associated with the code
(Figure 3.28). This allows you to verify that this was the tag that
you intended to select with the code before proceeding. If correct,
press the [enter] key. If incorrect, immediately repeat the process by
typing in another code. If the tag code was not valid, a message
indicating such is displayed as in Figure 3.29.
Figure 3.28 – Valid Tag Code
Figure 3.29 – Invalid Tag Code