Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control User Manual
Page 133
Operator Interface 3-11
7000 “C” Frame
7000L-UM300I-EN-P – June 2013
Top Level Menu
This screen (Figure 3.6) represents the main menu from which all
other screens (and the operations which they perform) are activated.
To activate an operation, simply press the function key
corresponding to the 'Softkey' shown on the screen. A screen for
that operation will be displayed. Refer to the section entitled "How
To:" for information about the various operations which may be
performed.
The screen identifies the drive product to which the
operator
interface is
attached and its overall state of operation. Four digital
meters show four selected
parameters
located in the drive. A Hobbs
meter displays the number of hours that the drive has been running.
The status of the drive will show one of the following:
NOT READY – drive is not ready to start
READY
– drive will start when commanded
FORWARD
– drive is running in the forward direction
REVERSE
– drive is running in the reverse direction
WARNING
– drive has a warning
FAULTED
– the drive is faulted
Figure 3.6 – Top Level Menu