Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 145)

Operator Interface 3-23
7000 “C” Frame 7000L-UM300I-EN-P – June 2013
Figure 3.23 – Selecting a Group
Figure 3.24 – Selecting a Member of a Group
From the SELECT GROUP screen (Figure 3.23), the tag can also be
selected via its name by pressing the [F7] key.
Via Name
When you know the name of the tag that you wish to select but do
not know what group it belongs to or are unsure of the full name,
this method of selection may be appropriate.
Selecting via a name is initiated from the SELECT GROUP screen
(Figure 3.23) by pressing the [F7] key. This displays the SELECT
LETTER screen shown in Figure 3.25.
Using the cursor keys, select (i.e. reverse video) the letter with
which the desired tag starts with. The [cursor up] and [cursor down]
keys move vertically within a column, the [cursor left] and [cursor
right] key move laterally within the rows. When the appropriate
letter has been selected, press the [enter] key.