10 - connecting ac power, Chapter objectives, What you will be doing – Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL User Manual
Page 124: 10ć1, Connecting ac power
Chapter
10
10-1
Connecting ac Power
This chapter shows you how to make ac connections to the components.
If you have the following components in your system, you have to connect
ac power to them.
Component:
Cat. no.:
power supply
5120ĆP1/B
industrial disk
5730ĆID3, 5710ĆID4, ĆID5, ĆID6, ĆID7
fan chassis
5110ĆFAN8
I/O power supply
1771ĆP2,ĆP4,ĆP7
program loader
5710ĆPL/B
You may also be wiring an:
isolation
transformer
master control relay
ATTENTION: Avoid ground loops. Make sure all
grounds are at the same potential. Otherwise you could
damage the equipment.
The following sections show you how to connect ac power to the
above components.
Gather ac Wiring Documentation
Gather the ac wiring documentation to determine which components you
have to connect to ac power.
Chapter Objectives
What You Will Be Doing