Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL - Manual (Page 41)

Chapter 4
Installing the Modules
4-3
Emergencies
Emergencies can occur due to the battery’s makeup.
Major components of the cell are: And these components are:
lithium metal highly reactive in water, flammable, and can create
toxic fumes when burned.
inorganic electrolyte thionyl chloride
(SOCI
2
)
fast evaporating, corrosive, has a pungent odor, reacts
violently to water, causes burns on contact, and
produces toxic and corrosive fumes and chemicals
upon decomposition.
Storing Lithium Batteries
To avoid hazardous situations, follow the guidelines below:
store in a cool, dry environment; typically 20 to 25
°
C (68 to 77
°
F) and
40 to 60% relative humidity
replace the batteries at least every two years
do not store used batteries longer than three months before disposal
use a first-in/first-out system for handling the batteries
clearly mark the contents of the storage area
do not smoke in the storage area
regularly monitor the temperature and humidity of the storage area
storage area should be well-ventilated and fire-protected; it should have
a system that automatically detects fires, extinguishes fires, and
activates an alarm signal
Personnel Protection
Safety equipment should be available and personnel should be equipped
with self-contained breathing apparatus, safety shields, safety goggles, and
protective clothing when they have to handle overheated or
leaking batteries.
Overheated Battery
When a lithium battery is overheated, explosion or violent rupture is
possible. Attempt to eliminate any external source of heat. If connected to
equipment, un-power the equipment. After cooling, remove the battery to
a well-ventilated fire-protected area.