Connect the i/o interface box – Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL User Manual
Page 83
Advertising
Chapter 6
Installing the Vision Components
6-2
To connect the I/O interface box (2801-N21) to the CVIM module, follow
these steps:
1. Connect the cable (2801ĆNC17) to the CVIM port
labeled MODULE I/O.
2. Run the cable to the CVIM as indicated in the
wiring documentation.
3. Connect the cable to the port labeled CVIM on the
I/O Interface box.
CVIM module
16774
I/O interface box
Connect the I/O Interface Box
Advertising