Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL User Manual
Page 85
Chapter 6
Installing the Vision Components
6-4
Color Monitor
To connect the color monitor, follow the steps below.
1. Connect each of the four colorĆcoded cables into its
port on the monitor (connect the white cable to the port
labeled SYNC).
2. Route the cables to the user interface.
3. Connect the other end of each cable into
corresponding port on the user interface.
BLUE
GREEN
RED
POWER LIGHT
PEN
SYNC
INPUT
16776
Color monitor
User interface
Black and White Monitor
To connect the black and white monitor, follow the steps below:
VID EO
IN
1. Plug the cable into the monitor's port
labeled VIDEO IN.
2. Route the cable to the user interface.
3. Plug the other end of the cable into the
user interface's port labeled GREEN.
16901
BLUE
GREEN
RED
POWER LIGHT
PEN
SYNC
INPUT
Black and white monitor
User interface