Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL - Manual (Page 153)

Chapter 12
Configuring Hardware for the MicroVAX
Information Processors
12-15
3. When you see:
VSmsv_STS_Siz . . . . . RD54
the formatter program is determining the type of disk it is formatting.
If you see:
VSmsv_STS_Siz . . . . . ??
or
VSmsv_RES_Err #2
84 FAIL
>>>>
then replace the disk.
4. When you see:
VSfmt_QUE_SerNBR (0–999999999)?
enter the serial number of the disk (it should be on the packing slip).
If you do not have a serial number, assign a unique number to it.
Record the number on your MicroVax Information Processor
worksheet.
5. When you see:
VSfmt_QUE_RUsure (DUA0 1/0) ?
enter: 1 to continue the formatting procedure.
While the disk is formatting, these messages gradually appear:
VSfmt_STS_rdMBB . . . . . . . . . . . . . . . ??
VSfmt_STS_FMTing. . . . . . . . . . . . . . . OK
VSfmt_STS_ChkPass. . . . . . . . . . . . . . .OK
VSfmt_STS BBRvec : = n
VSfmt_RES_Succ
The actual formatting takes about 45 minutes. When you see the last
line of the display, the procedure is complete and the disk is ready to
be used. Return to the previous section and verify the disk.