Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL - Manual (Page 68)

Chapter 4
Installing the Modules
4-30
3. Connect the device as shown below.
Programming terminal
Carrierband
module
Broadband
module
18391
To connect to carrierband/broadband, follow the steps below.
Carrierband
module
Broadband
module
1. Run the MAP cable to the module.
2. Locate the connector on the module
labeled BROADBAND or CARRIERBAND
and attach the MAP cable to the connector.
3. Secure the connector.
For more information on broadband or carrierband cabling specifications,
call General Motors Photographic (313) 422-2900 and ask for:
MAP/TOP Broadband Specification
MAP/TOP Carrierband Specification