Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL - Manual (Page 34)

Chapter 2
Mounting the Components
2-12
Attach the User Interface Box
To attach the user interface box, follow the steps below:
1. Align the flange of the user interface with the two standoffs on the
bottom of the I/O board.
9 10 11 12 14 15 13
POWER
BLUE
GREEN
RED
LIGHT
PEN
SYNC
INPUT
16906
2. Secure the user interface and I/O board to the mounting surface using
two screws.
After you have mounted the components, go to chapter 3 to ground
the system.
What to do Next