Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL - Manual (Page 84)

Chapter 6
Installing the Vision Components
6-3
To connect the user interface box (2801-N22) to the:
CVIM module
color monitor (2801-N8) or black and white monitor
(2801-N6, -N9,-N20)
light pen (2801-N7)
CVIM Module
To connect the CVIM module, follow these steps:
1. Connect the cable (2801ĆNC18) to the CVIM port
labeled USER INTERFACE.
2. Route the cable to the user interface as indicated
in the wiring documentation.
3. Connect the cable to the port labeled INPUT on the
user interface.
16775
BLUE
GREEN
RED
POWER
LIGHT
PEN
SYNC
INPUT
User interface
Connect the User
Interface Box