Check the pi modules, 11ć3 – Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL User Manual
Page 130
Advertising
Chapter 11
Checking the Hardware
11-3
Follow the steps below to test the modules in the chassis.
1.
Make sure you have disabled your outputs as described in the
beginning of this chapter.
2.
Turn the RM key to Program.
3.
Turn off the power from the power supply.
Turn off the
power supply.
19792
4.
Apply ac power to the PI chassis only.
5.
Turn on the power from the power supply.
6.
And check the indicators of each module.
Check the PI Modules
Advertising