Rockwell Automation 5000,D50006.2.10 PI INSTALLATION MANUAL - Manual (Page 32)

Chapter 2
Mounting the Components
2-10
5. Install the filter:
a. Make sure the air flow arrows on
the front of the filter are pointing up.
b. Align the filter with the two clips
at the bottom of assembly and slide
filter into the assembly.
19783
To mount a camera, follow the steps below.
1. Mount the camera on your own mounting bracket.
a. Design your bracket so that it:
does not cover any connectors
allows you to adjust the lens
holds the camera steady
attaches to the mounting holes on the camera
b. Mount the bracket in the indicated position in the
mounting documentation.
c. Attach the bracket to the camera.
2. Attach the optional camera enclosure, if your configuration has it.
Mount the Camera