Metrohm tiamo 2.4 (process analysis) - Manual (Page 1112)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1096 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
The calibration can be carried out with either manual solution changes or
automatic solution changes with the aid of a Sample Processor.
Commands
The following commands can be selected for calibration:
￭ CAL Cond
Measurement of conductivity standards for the determination of the
cell constant of conductivity measuring cells.
￭ CAL Spec
Measuring command for wavelength calibration.
￭ CAL LOOP Conc
Calibration loop for the calibration of ion-selective electrodes (ISE elec-
trodes).