Metrohm tiamo 2.4 (process analysis) User Manual
Page 496
5.6 Commands
■■■■■■■■■■■■■■■■■■■■■■
480
■■■■■■■■
tiamo 2.4 (for Process Analysis)
Window = Time
Input range
0 - 999999 s
Default value
0 s
Upper limit
Value for the upper limit of the window.
Window = Measured value pH
Input range
-20.0 - 20.0 pH
Default value
20.0 pH
Window = Volume
Input range
0.00000 - 9999.99 mL
Default value
9999.99 mL
Window = Time
Input range
0 - 999999 s
Default value
999999 s
Gran evaluation
NOTE
This evaluation method is possible only with Titrando and 855.
Gran evaluation
on | off (Default value: off)
If this option is enabled, then titration curves will be evaluated in accor-
dance with the Gran Plot procedure(see Chapter 5.6.3.10.4, page 932).
Procedure
Selection of the Gran procedure.
Selection
Normalized | Standard
Default value
Normalized
Initial volume
Volume which must be present in the measuring vessel before the com-
mand is started.
Input range
0.01 - 9999.99 mL
Default value
50.0 mL