Metrohm tiamo 2.4 (process analysis) - Manual (Page 1474)

6.8 Subwindow Colorimetric sensors
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1458 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Warning limits for coefficient of determination
on | off (Default value: off)
If this option is activated, then the values for the coefficient of determi-
nation will be shown in orange if the limits are exceeded.
Lower limit
Lower warning limit for the coefficient of determination.
Input range 0.00000 - 1.00000
Default value 0.98000
Upper limit
Upper warning limit for the coefficient of determination.
Input range 0.00000 - 1.00000
Default value 1.00000
Intervention limits for coefficient of determination
on | off (Default value: off)
If this option is activated, then the values for the coefficient of determi-
nation will be shown in red if the limits are exceeded.
Lower limit
Lower intervention limit for the coefficient of determination.
Input range 0.00000 - 1.00000
Default value 0.96000
Upper limit
Upper intervention limit for the coefficient of determination.
Input range 0.00000 - 1.00000
Default value 1.00000