Metrohm tiamo 2.4 (process analysis) User Manual
Page 1665
■■■■■■■■■■■■■■■■■■■■■■
7 Devices
tiamo 2.4 (for Process Analysis)
■■■■■■■■
1649
Digestion unit
Input range
0% mapping of the input - 100% mapping of
the input 'Mapping unit of the input or of the
calculated value'
Default value
0% mapping of the input 'Mapping unit of
the input or of the calculated value'
Free controller
Input range
0% mapping of the input - 100% mapping of
the input 'Mapping unit of the input or of the
calculated value'
Default value
0% mapping of the input 'Mapping unit of
the input or of the calculated value'
Control value
Selection of the control value from all of the analog outputs of the Con-
troller output type.
Selection
'Port designation'
'Port designation'
Only analog output ports of the Controller output type can be
selected.
Control task
Selection of the control task.
Selection
Digestion unit | Free controller
Default value
Digestion unit
NOTE
The control parameters adjust themselves on the basis of permanently
specified parameter sets when the control task is changed. They can,
however, be adjusted.