Metrohm tiamo 2.4 (process analysis) - Manual (Page 1542)

7.5 855 Robotic Titrosampler
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1526 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
7.5.6 Properties - Initial position
On tab Initial position, a position can be defined which is automatically
moved to when initializing the sample changer.
Moving to the initial position
on | off (Default value: off)
If this option is activated, the position defined here is moved to when initi-
alizing the device.
Tower
Selection of the tower on the sample changer for moving to the required
position.
Only editable for Move to initial position = on and if the corresponding
sample changer has 2 towers, otherwise inactive.
Selection 1 | 2
Default value 1
Destination
Selection of the target position which is to be moved to:
Only editable for Move to initial position = on, otherwise inactive.
Selection Rack position | Special beaker | Ext. position
Default value Rack position
Rack position
Predefined position on the rack. The lift is thereby lowered to the work
position defined for that position.
Special beaker
Special position on the rack defined in the rack properties. The lift is
thereby lowered to the work position defined for that position.
Ext. position
External position which is defined for the Swing Head mounted to the
tower. The lift is thereby lowered to the work position defined for that
position. This option is only available if a Swing Head is mounted to the
tower.
Number
Specification of the number of the rack position, of the special beaker or
of the external position.
Only editable for Move to initial position = on, otherwise inactive.
for Move = Rack position
Input range
1 - 999
Default value 1