Metrohm tiamo 2.4 (process analysis) User Manual
Page 1727
■■■■■■■■■■■■■■■■■■■■■■
8 Manual control
tiamo 2.4 (for Process Analysis)
■■■■■■■■
1711
Input range
0 - 999999
Default value
10
Selection
s | min
Default value
s
Status
Display of the current status.
Selection
ACTIVE | INACTIVE | ERROR
[Start]
Sets the stepping motor to ACTIVE.
[Stop]
Sets the stepping motor to INACTIVE.
Reset
On this tab the motor control can be reset to factory settings.
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Timeout
Time in seconds or minutes within which the action must have run
through completely. If this is not done after the maximum waiting time
has expired, the status of the stepping motor will be set to ERROR.
Input range
0 - 999999
Default value
10
Selection
s | min
Default value
s
Status
Display of the current status.
Selection
ACTIVE | INACTIVE | ERROR
[Set]
Resets the stepping motor to factory settings.