Metrohm tiamo 2.4 (process analysis) - Manual (Page 1701)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 Manual control
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1685
730 only
Selection
Tower 1 + 2 | External positions
Default value Tower 1 + 2
Shift position for
If this option is selected, the current lift position is assigned to the shift
position of the tower.
all except 730
Selection
Tower | External positions
Default value Tower
730 only
Selection
Tower 1 + 2
Default value Tower 1 + 2
Special position for
If this option is selected, the current lift position is assigned to the special
position of the tower.
all except 730
Selection
Tower | External positions
Default value Tower
730 only
Selection
Tower 1 + 2
Default value Tower 1 + 2
Swing position
If this option is selected, the current lift position is assigned to the swing
position of the robotic arm.
Selection External positions
Default value External positions
[Assign]
Triggers assignment. During the assignment the cursor is displayed as
hourglass.
Robotic arm position
Assigning the current rack position to a specific external robotic arm posi-
tion.
Current position
Shows the current position of the robotic arm in °.