Metrohm tiamo 2.4 (process analysis) User Manual
Page 56
2.4 Formula editor
■■■■■■■■■■■■■■■■■■■■■■
40
■■■■■■■■
tiamo 2.4 (for Process Analysis)
Identifica-
tion
Description
Commands
.CP{#}.MEA
Measured wavelength of the cali-
bration point in nm. If no mea-
sured peak can be assigned, then
not found will be entered.
CAL Spec
.CP{#}.REF
Reference wavelength of the cali-
bration point in nm.
CAL Spec
.CYL
Cylinder volume of the exchange
or dosing unit used for the com-
mand
DET, MET, SET,
KFT, STAT,
STDADD dos,
STDADD auto,
ADD, DOS, LQH,
PREP, EMPTY
.DBL
Total duration for the processing
of the command in s
DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS, CAL
Cond, CAL
MEAS, CAL Spec,
STDADD, DOS,
ELT MEAS
.DEF
Default value which is defined in
the configuration for an IO port
ANALOG OUT,
DIGITAL OUT
.DRI
Current and/or last drift for drift
correction in µL/min
SET, KFT, KFC,
BRC
.DSC
Time for processing all start con-
ditions in s
DET, MET, SET,
KFT, STAT
.DTI
Time in s for drift correction (time
from the start of the titration to
the end of the command)
SET, KFT, KFC,
BRC
.EGF
Last measured gas flow rate
(measured value following pro-
cessing of the command) in
mL/min
MEAS T/Flow