Metrohm tiamo 2.4 (process analysis) User Manual

Page 1461

Advertising
background image

■■■■■■■■■■■■■■■■■■■■■■

6 Configuration

tiamo 2.4 (for Process Analysis)

■■■■■■■■

1445

Input range

–2.147E+9 - 2.147E+9

Default value

7.500

Intervention limits for pH(0) (for pH electrodes only)
on | off (Default value: off)

If this option is activated, then the values for pH(0) will be shown in red
if the limits are exceeded.

Lower limit

Lower intervention limit for pH(0).

Input range

–2.147E+9 - 2.147E+9

Default value

6.000

Upper limit

Upper intervention limit for pH(0).

Input range

–2.147E+9 - 2.147E+9

Default value

8.000

Warning limits for E(0) (for ISE electrodes only)
on | off (Default value: off)

If this option is activated, then the values for E(0) will be shown in
orange if the limits are exceeded.

Lower limit

Lower warning limit for E(0).

Input range

–2.147E+9 - 2.147E+9 mV

Default value

–15 mV

Upper limit

Upper warning limit for E(0).

Input range

–2.147E+9 - 2.147E+9 mV

Default value

15 mV

Intervention limits for E(0) (for ISE electrodes only)
on | off (Default value: off)

If this option is activated, then the values for E(0) will be shown in red if
the limits are exceeded.

Lower limit

Lower intervention limit for E(0).

Advertising